DRAWN ARC STUD WELDERS
TRU-WELD
TW6900 STUD WELDING SYSTEM
 |
The TW6900 is a fully integrated stud welding system for ferrule-shielded and gas-shielded drawn arc stud welding. The TW6900 contains two (2) digital controls for weld time and current. Stepless time and current control allow for infinite settings for fine-tuning the welding output. The system was designed to meet the most challenging stud welding jobs, including thru-deck applications, including G90 decking. |
INCLUDES: 3000 Amp Power Supply, TWE17000 Heavy Duty Stud Gun, 50 feet of 4/O Weld and Control Cable and 25 feet of 4/O Ground Cable.
WELD RANGE |
1/4” To 1-1/4” Diameter |
INPUT VOLTAGE |
230/460/575 VAC 3 Phase 60 Hz 400 VAC 3 Phase 50 Hz |
DUTY CYCLE |
Up to 5/8”: Unlimited Up to 3/4”: 22 to 24 Per Minute Up to 7/8”: 16 to 18 Per Minute Up to 1”: 12 to 14 Per Minute Up to 1-1/4”: 4 to 5 Per Minute |
FUSING REQUIREMENT |
230 / 200 Amps 460 / 100 Amps 575 / 90 Amps |
DIMENSIONS |
28” H x 29” W x 36” L 760 Lbs |
PERFORMANCE |
Powerful Output for Even the Largest Diameter Jobs |
SAFETY |
Safety Welding Interlock Keeps System from Double Triggering and Saves on Chuck Wear |
COUNTER |
Resettable Stud Job Counter |
Privacy Policy Terms of Service
NELSON, PROWELD and NELSON STUD WELDING are registered trademarks of Nelson Stud Welding, Inc.