ARC STUDS
DEFORMED ANCHOR DA
STUD SPECIFICATIONS
FERRULE SPECIFICATIONS
| DIAMETER X LENGTH | WEIGHT PER 1000 | D | B | G | M |
| 3/8 x 6-1/8 | 180 | .637 | .505 | .281 | .437 |
| 3/8 x 10-1/8 | 300 | ||||
| 3/8 x 12-1/8 | 360 | ||||
| 3/8 x 18-1/8 | 520 | ||||
| 3/8 x 24-1/8 | 720 | ||||
| 3/8 x 36-1/8 | 1035 | ||||
| 1/2 x 5-1/8 | 269 | .795 | .650 | .281 | .469 |
| 1/2 x 10-1/8 | 537 | ||||
| 1/2 x 12-1/8 | 640 | ||||
| 1/2 x 18-1/8 | 960 | ||||
| 1/2 x 24-1/8 | 1280 | ||||
| >1/2 x 30-1/8 | 1650 | ||||
| 1/2 x 36-1/8 | 1920 | ||||
| 5/8 x 12-3/16 | 1000 | 1.030 | .785 | .328 | .516 |
| 5/8 x 18-3/16 | 1500 | ||||
| 5/8 x 24-3/16 | 2000 | ||||
| 5/8 x 30-3/16 | 2500 | ||||
| 5/8 x 36-3/16 | 3000 | ||||
| 3/4 x 12-3/16 | 1485 | 1.215 | 1.030 | .469 | .656 |
| 3/4 x 18-3/16 | 2210 | ||||
| 3/4 x 24-3/16 | 2880 | ||||
| 3/4 x 30-3/16 | 3625 | ||||
| 3/4 x 30-3/16 | 4400 |
DIAMETER: Available in diameters from 3/8" through 3/4" .
LENGTH: Length is before weld. Stud diameters 1/2" and smaller will be approximately 1/8" shorter after welding. Diameters of5/8" and larger will be approximately 3/16" shorter after welding. Any length of deformed anchors is available upon request.
MILD STEEL: Low carbon steel. ASTM: A-496
STAINLESS STEEL: Deformed Bar Anchors are available in 300 series (except 303) stainless steel.
FERRULES: All orders for studs include required ferrules.
WEIGHTS: Are approximate and will vary with different heats of steel.
Privacy Policy Terms of Service
NELSON, PROWELD and NELSON STUD WELDING are registered trademarks of Nelson Stud Welding, Inc.