The ARC-1850 is a fully regulated stud welding power supply that is available in a single or dual gun version. Both versions have the constant output feature that allows the unit to be used as a power source that can operate external stud welding control units. Stick welding and Arc air gouging processes are available only as an option. An added feature in the ARC- 1850 is the ability to dial in the desired weld time and weld current before even making a weld. By selecting the setup mode, the weld time and current can be adjusted and displayed on the front panel digital meters.
A specially designed electronic gun control circuit has been incorporated into the system. If a fault condition occurs due to a shorted gun solenoid or a faulty control cable, the circuit will prevent gun retriggering and eliminate damage to printed cir- cuit boards.
Ships around 950 lbs.
DIMENSIONS: | 26”H X 24”W X 33”D |
OUTPUT: | 1850 AMPS @45 VDC |
WEIGHT: | 500 lbs. |
DUTY CYCLE: | 12 GA- 5/8” UNLIMITED
|
INPUT: | 230/460/575 VAC 3 PHASE 60 HZ |
FUSING: | 200/100/90 |
OPTIONAL INPUT: | 220/380/415 VAC - 50HZ |
TIME CONTROL: STEPLESS ADJUSTABLE |
.1 – 1.6 SEC. |
CURRENT CONTROL: STEPLESS ADJUSTABLE |
100 – 1900 AMP |