SHEAR CONNECTOR STUDS
|
 For welding to fillet or heel of angle consult ERICO representative for ferrule part number. |
||||||
| STUD SPECIFICATIONS | FERRULE SPECIFICATIONS | ||||||
|---|---|---|---|---|---|---|---|
| D | A | H | PART NO. | B | D | G | M |
| 3/4 | 3/8 | 1-1/4 | 34FER | 1.030 | 1.215 | .469 | .656 |
| 34TFER | 1.210 | 1.338 | .400 | .587 | |||
| 7/8 | 3/8 | 1-3/8 | 78FER | 1.210 | 1.408 | .545 | .732 |
| 78TFER | |||||||
| Description | Part No. | Pieces | Pounds | Pounds | Description | Part No. | Pounds | Pieces | Pounds |
|---|---|---|---|---|---|---|---|---|---|
| Box | Box | M Pieces | M Pieces | Box | Box | ||||
| 3/4 x 3-3/16 | SC343 | 125 | 60 | 480 | 3/4 x 6-3/16 | SC346 | 60 | 50 | 850 |
| 3/4 x 3-3/8 | SC3433 | 125 | 62 | 513 | 3/4 x 7-3/16 | SC347 | 60 | 59 | 1020 |
| 3/4 x 3-7/8 | SC3437 | 100 | 58 | 568 | 3/4 x 8-3/16 | SC348 | 50 | 56 | 1112 |
| 3/4 x 4-3/16 | SC344 | 100 | 62 | 600 | 7/8 x 3-11/16 | SC7831 | 100 | 73 | 726 |
| 3/4 x 4-3/8 | SC3443 | 100 | 62 | 625 | 7/8 x 4-3/16 | SC784 | 100 | 81 | 810 |
| 3/4 x 4-7/8 | SC3447 | 75 | 51 | 707 | 7/8 x 5-3/16 | SC785 | 75 | 75 | 1000 |
| 3/4 x 5-3/16 | SC345 | 60 | 44 | 740 | 7/8 x 6-3/16 | SC786 | 50 | 57 | 1140 |
| 3/4 x 5-3/8 | SC3453 | 60 | 45 | 775 | 7/8 x 7-3/16 | SC787 | 45 | 59 | 1300 |
| 3/4 x 5-7/8 | SC3457 | 60 | 49 | 800 | 7/8 x 8-3/16 | SC788 | 40 | 59 | 1510 |
COX INDUSTRIES TYPE SC CONNECTOR STUDS are designed to effectively tie the concrete to the steel beams and to resist shear loadings between the concrete slab and steel beamin composite construction. All orders for studs include required ferrules.
LENGTH: Length is before weld. Studs will be approximately 3/16" shorter after welding. Lengths for shear connector studs are generally set by governing specifications.
All COX INDUSTRIES shear connector studs meet AWS specifications. Test reports available on request.
STAINLESS STEELS: COX INDUSTRIES studs are also available in weldable stainless steel. Type 304 is the most commonly used. Other grades of stainless steel (except Type 303) available when required.
FLUX: COX INDUSTRIES Headed Anchor Studs are solid fluxed.
MATERIAL: Low carbon steel.
Mechanical Properties: (as cold drawn)
Tensile: 60,000 psi min.
Reduction in Area: 50% min.
