ARC STUDS
HEADED CONCRETE ANCHOR CA
D | A | H | D | B | F | M |
1/4 | .187 | .500 | .454 | .380 | .234 | .390 |
3/8 | .281 | .750 | .640 | .505 | .234 | .390 |
1/2 | .312 | 1.000 | .795 | .650 | .250 | .438 |
5/8 | .312 | 1.250 | 1.030 | .785 | .328 | .516 |
DESC |
POUNDS M PIECES |
PIECES BOX |
POUNDS BOX |
DESC |
POUNDS M PIECES |
PIECES BOX |
POUNDS BOX |
1/4 x 1-1/8 | 23 | 3000 | 70 | 1/2 x 3-1/8 | 225 | 325 | 94 |
1/4 x 2-11/16 | 43 | 1500 | 65 | 1/2 x 3-5/8 | 247 | 300 | 125 |
1/4 x 4-1/8 | 65 | 1000 | 65 | 1/2 x 4-1/8 | 280 | 250 | 85 |
3/8 x 1-3/8 | 67 | 1000 | 67 | 1/2 x 5-5/16 | 340 | 200 | 86 |
3/8 x 1-5/8 | 73 | 1000 | 73 | 1/2 x 6-1/8 | 393 | 150 | 79 |
3/8 x 2-1/8 | 91 | 1000 | 91 | 1/2 x 8-1/8 | 504 | 200 | 63 |
3/8 x 2-11/16 | 106 | 700 | 74 | 5/8 x 2-11/16 | 308 | 250 | 95 |
3/8 x 3-1/8 | 122 | 600 | 73 | 5/8 x 4-3/16 | 440 | 150 | 90 |
3/8 x 4-1/8 | 148 | 400 | 59 | 5/8 x 5-3/16 | 520 | 125 | 66 |
3/8 x 6-1/8 | 216 | 250 | 54 | 5/8 x 6-3/16 | 620 | 100 | 80 |
1/2 x 2-1/8 | 168 | 500 | 84 | 5/8 x 6-9/16 | 660 | 100 | |
1/2 x 2-5/8 | 198 | 400 | 79 | 5/8 x 8-3/16 | 784 | 125 |
HEADED ANCHOR STUDS: Designed for welding to flat surfaces or welding in the fillet or to the heel of angles. When ordering specify if studs are to be welded to flat surfaces or in fillet or to heel of angle.
DIAMETER: Available in diameters from 1/4" through 5/8" .
LENGTH: Length is before weld. Stud diameters 1/2" and smaller will be approximately 1/8" shorter after welding. 5/8" and smaller will be approximately 3/16" shorter after weld. Maximum length available for cold headed product is 8-3/16". Prices on hot formed studs over 8-3/16" available on request.
MILD STEEL: Low carbon steel.
STAINLESS STEEL: Type 304 is the most commonly used. Other grades of stainless steel (except Type 303) are available when required.
FERRULES: All orders for studs include required ferrules.
FLUX: Studs are solid fluxed.